Online Ordering WiFi Printer Setup
You will need an ethernet cable to do the initial setup.
The content of the box received will be the printer, its power cable, and a wifi stick adaptor. You will want plug the wifi stick into one of the two usb ports in the back as well as the power cable and the ethernet cable. Once it is setup you can follow these steps:
1) While the printer is off hold down the feed button, and flick the power switch on. Hold the feed button until it starts to print out the system info.
2) On this print out, the local IP will be listed (bottom of the second page). Open a web browser on a computer using the same network, and input the local IP in the address bar. Login with the following information:
Username: root
Password: Spill0ver!
3) Once logged in you will see a “Wireless” network tab on the left where you can either scan for local wifi connections or manually put in the information.
4) Use the “Save” tab to save and print the system configuration once the network has been setup – on this last system configuration we will need the MAC address listed.
Note: There is an add-on option to purchase a Buzzer for your printer if you want to get a sound notification every time an order prints. Please contact support@spillover.com if you would like more info.
Related Articles
Online Ordering WiFi Printer Setup
You will need an ethernet cable to do the initial setup. The content of the box received will be the printer, its power cable, and a wifi stick adaptor. You will want plug the wifi stick into one of the two usb ports in the back as well as the power ...Online Ordering Printer Setup ( Star mC-Print3)
Connect to power and load paper STEP 1. Remove the rear cover by inserting your fingernails or a flat object into the clearances as shown below. Pull out each side one by one. STEP 2. With the rear cover removed, connect the power cord and AC adapter ...Online Ordering Printer Setup (Star mC-Print3 Ethernet Receipt Printer)
Connect to power and load paper STEP 1. Remove the rear cover by inserting your fingernails or a flat object into the clearances as shown below. Pull out each side one by one. STEP 2. With the rear cover removed, connect the power cord and AC adapter ...FAQ - Online Ordering Solution
What options are there for managing orders? There are multiple options for handling orders and many of these options can be used at the same time. E.g., get a text alert or an automated call if a print fails. OrderGuruPro iPad App (with Version 2 of ...FAQ - Online Ordering Solution
What options are there for managing orders? There are multiple options for handling orders and many of these options can be used at the same time. E.g., get a text alert or an automated call if a print fails. OrderGuruPro iPad App (with Version 2 of ...