Connect to power and load paper STEP 1. Remove the rear cover by inserting your fingernails or a flat object into the clearances as shown below. Pull out each side one by one. STEP 2. With the rear cover removed, connect the power cord and AC adapter ...
Connect to power and load paper STEP 1. Remove the rear cover by inserting your fingernails or a flat object into the clearances as shown below. Pull out each side one by one. STEP 2. With the rear cover removed, connect the power cord and AC adapter ...
Note: There is an add-on option to purchase a Buzzer for your printer if you want to get a sound notification every time an order prints. Please contact support@spillover.com if you would like more info.
You will need an ethernet cable to do the initial setup. The content of the box received will be the printer, its power cable, and a wifi stick adaptor. You will want plug the wifi stick into one of the two usb ports in the back as well as the power ...
You will need an ethernet cable to do the initial setup. The content of the box received will be the printer, its power cable, and a wifi stick adaptor. You will want plug the wifi stick into one of the two usb ports in the back as well as the power ...